Archives for posts with tag: Repairs

It’s not often I get permission to take stuff apart. More precisely, I spend a lot of time doing creative stuff, so my purely destructive side rarely gets its time in the sun to frolic and cavort and otherwise express itself in all it’s entropic glory. Today, however, is different.

But first, a story

A tidy little instrument from the front.

A tidy little instrument from the front.

On a recent trip south to the desert to visit the family (something of a do-over for Christmas, since we were all sick as dogs over the holiday and didn’t see anyone other than ourselves), my brother-in-law gifted our family a used Squier Mini Player Strat with a built-in amplifier and speaker. This thing is a true piece of guitar oddity, and pretty freaking rare apparently. It’s a “mini,” which apparently means it has a 3/4 size neck, even though the body is the same size. Usually Stratocaster-style electrics have three pickups and a selector switch, along with a couple of tone knobs and a volume, but not this one. Because of the speaker, there’s really only room for a single humbucking pickup, one tone knob, and the volume. Of note is despite the somewhat toylike look of the body with the speaker grille, there’s really nothing toy about this; it’s a real instrument. Read the rest of this entry »


Yesterday, I picked up a band saw for $20. (thanks, Craigslist!) It’s in need of some repair. Let’s see what’s funky about it.

Craftsman 10" benchtop band saw

Here is the little bugger now. From the front, it looks to be in relatively good shape. Notice the “throat” area of that saw (the  area between the blade and the left side of the saw from this photo’s perspective). The fact that it’s so deep (heh) means that it has clearance on par with band saws much, much larger. The table is anodized aluminum from the looks of it, and is slightly corroded.

Yes, that’s the back of my car. Good thing you can’t see the floors.

Bandsaw power switch is missing the safety key that allows you to turn it on.

Here’s the first real problem, easily solved. The safety key for the power switch is missing. The guy I bought it from had one that fit his Sears table saw, and so he didn’t need to get a replacement. I am not so lucky. Still, it’s only $6 at Sears to replace, so then I’m out only $26 for a very capable band saw.

The bandsaw is opened, and the drive pulley is damaged. It will spin freely without moving the timing belt, which would in turn move the band saw blade idling pulley.

Now this is the real problem. No, not the sawdust, the drive pulley. You can barely see it from the photo (it’s the black plastic thing just left of center on the photo), but it’s backed off about 1/2″ from the motor spindle, and it appears to be stripped of its timing belt teeth on the pulley itself. This means that when you turn it on, the spindle will rotate furiously, but the timing belt and the idling pulley on the other end of that belt don’t move, which means the saw blade doesn’t move.

Sears sells a replacement for $13.50 online. So  now the bandsaw will cost me at least $39.50, but that’s still a bargain.

The front panel shows that the drive pulley has been rubbing against the front panel, wearing off the paint and likely helping cause the demise of said pulley.

If you look at the inside of the front panel, you can see where the drive pulley has been rubbing up against the panel, wearing a nice donut shape through the paint to the bare metal. Good times.

The back side of the saw.

Finally, the back side of the saw, which shows some rust pitting on several parts. Again, mostly cosmetic, but should be addressed with a nice cleaning. Basically,  some hardware replacement will  be needed if the rust can’t be cleaned off. Also, I would imagine that replacing the capacitor on the motor would be a useful thing to do. Then a coat of rust-resistant paint over the pieces and this should be a serviceable saw.

I’ll write more as the cleanup of this particular tool progresses, and hopefully it will actually work here pretty soon.

Update 4:50pm, March 3: Having ordered the parts on, I didn’t take into account sales  tax and shipping, so the total for the key and the pulley is $30 delivered. I should get those parts next Tuesday. So I have between now and then to clean this little beasty up.


%d bloggers like this: